What are the inspection elements of automobile inspection tools?

Author：Web　Source：Web　Date：2018-05-26 17:06:56　Sentiment：63

Along with the progress of the requirements for product precision in industrial production, the requirements for the precision of automobile production are also constantly improved. At this time, automobile inspection tools are required. The measuring head orientation and view point of automobile inspection tools can be set arbitrarily according to users' demands, the measurement process can be completed actively and the detection data can be directly entered into the database. The higher flexible inspection system has the function of error data analysis, and the data can be used to calculate the process control. So what are the inspection components?

1. As for the important appearance of the part, the movable assembly can be used to check its flatness when the structure is limited. Each movable assembly has at least two catheters or guide posts. The distance of the catheter or guide column should not be less than 200 mm. Aluminum alloy may be used as the substitute for wood in the testing part of the jigger.

2. The test pin consists of three parts: guide, test and handle. In order to ensure the test pin is tested successfully, it is necessary for the equipment to guide the axle sleeve, guide the axle sleeve and the inspection tool body to be bonded and connected. According to the different holes, it is mainly divided into cylinder test pin and ellipsoidal pin edge pin (detection part), which needs to be used in cooperation with anti-rotating guide sleeve. The pin data is 45# steel, and the operation part is quenched, and the hardness reaches hrc40-45, which needs to be blackened and marked.

3. The section sample is used for testing the type surface required by the equipment. The sample is made of high quality steel or rigid aluminum plate with a thickness of about 6mm. The structure is divided into rotary type and insert type. The gap between the model and testing parts for 3 mm, the section model should be placed in straight direction type surface method, coordinate YiQu integer. Model bearing plate and the thickness of the section should be greater than 10 mm, when bearing is greater than 150 mm should be added material thickness, height during 150 ~ 300 mm can be competitive, by adding stiffener bearing rigidity, when greater than 300 mm, should equipment support under the bearing pedestal. Section model on the fixture to secure, no looseness, and bearing equipment, not to interfere in positioning pin and clamping device.

4. The stop-gauge (stop-rod) consists of a through-section, a handle and a stop-section. It is primarily used to detect the type surface.

As for which inspection components are Shared here today, the use of car inspection tools can be used to control the simplicity of products of various sizes (such as aperture, space scale, etc.) in the production of automobiles, and improve the power and control quality of the products produced.